Recently, my Call Manager box was upgraded with Windows patches. This brought the entire system down, so I removed the patches. Now we are up and running. However, we do not have access to the Admin page. I checked to see if it might be caused by...
Recently, my Call Manager box was upgraded with Windows patches. This brought the entire system down, so I removed the patches. Now we are up and running. However, we do not have access to the Admin page. I checked to see if it might be caused by...
Hi TomasI'm using DMP 105, of which 20 are 4400 and 85 are 4305g. In all we've set the resolution in the Screen Width 1920 x Height 1080. The video sources used were created in SD and HD. When played on the DMP, the video is not visulizado, leaving a...
We are running gatekeeper IOS version 12.3(11r)T2 where we have to reboot GK monthly to avoid memory leak issue causing GK to be nonfunctional after some time.It was recommended to have monthly reboots to avoid the memory leaks. It has worked since i...
Hi forum,I'm tring to display one presentation in portrait mode which I designed in Digital Media Designer 2.0, but everytime I play it, it displays it in landscape mode, though I checked the portrait mode in the Orientation properties of the tem...
Hi All,I'm currently running DMM version 5.1 and use LDAP authentication to access the DMM. I currently have 3 users defined in the Admin role, myself and two others.Whenever I perform a restart of the DMM (Using Administration interface, Services t...
We have a FoIP envrionment and before I start blaming the software, I want to make sure that my routing is properly done. I'm able to place a fax call from one branch office to another but the call gets dropped.RightFax ---------------à2811---------(...
As per the tittle, would like to know if a Cisco C1861-UC-4FXO-K9 router with Call Manager Express/Unity would be able to support the new 99xx series of phones or not. What version of CME is installed on these devices by default?Thanks in advance.Sea...
I have some problem in 4400G someone format the comapq flash 4 G can help me to back all files or what can I do about that
Is anyone successful in adding a video w/ audio with the built-in camera/mic on a Mac Book Pro? Video is fine, but I have zero audio. Works fine for other products, Skype, CUPC, etc. I've tried all three options and different browsers.TIA!-Jon
I'm first time working with DMS 5.2 and I am experiencing this issue with DMP 4305, I am configuring them and when a save changes then restart'em to take those changes they just don't start up, the pop up of 30 secs to reboot stays on the screen for ...
I have an operating call manager locally and will like to connect an IP phone via the internet.(eg from home). How can I achieve this and securily?Thank you very much
I'm not sure if this is a problem or not, in any event I can't explain it. On some calls to the PSTN (inbound and outbound) my users are seeing Temp Fail on the status bar (the line above Hold EndCall Transf... more). It is happening on 7960s and 7...
Hi Network Professionals,Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View. Error Message:Performance polling is not supported for the current capability.The server is ful...
Hi. Does anyone knows if there is a way to accelerate the transition between images (slideshow) in v5.2? The larger the images, the slower the transition, especially in fade effect.
Greetings - I have a series of about a dozen 30 second ads running on the DMP 4400G. Is there a way to change the transitions between each ad, say either a smooth fading transition or just a cut to the next? At the moment there's a 2 or 3 second whit...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-22-2024 04:46 AM | ||
04-18-2024 07:46 AM | ||
04-15-2024 07:41 PM | ||
04-09-2024 02:09 PM | ||
02-25-2024 06:28 AM |