Other Collaboration Subjects

dear sir, We've both ipipgateway configured to communicate with each other. Attachment pngipipgw1 is our local voice router with destination pattern 3XXXX that need to link with other country Japan with destination pattern 7xxxx . All other country...

HI, have a couple of sites that are experiencing voice quality issues.both on the end of E1 cct's. Policy map on routers all show no drops in the priority queue, phones show no transmit or receive errors on their statistics. The local switch show no ...

Hi all,I have some IP Phones connected to a Cisco 2950 and there're some problems with them.1. The ports connecting to IP Phones are configured with Auto QoS (auto qos voip cisco-phone), but when the PC connected to the PC Port of a phone got some la...

This morning, all of a sudden we were unable to make outbound calls on our PRI. We were still receiving inbound calls just fine. We are using a 2811 gateway. I captured the attached debug isdn q931 output when the problem occurred. I did a shut/no sh...

I am looking to write a script that will export Ready resources, Contacts Waiting, and Oldest contact in queue to a csv file.Anyone do this before?Anyone have any script examples to dump information to a file?I have attached my failed attempt if anyo...

HiI am studying the Call Manager and was wondering why the voice mail port is configured with a alternate routing and device pool.Is the alternate routing used when the voice mail port dials out for the mwi.What is the device pool used for.ThanksBill

I have a 3rd party voicemail that will accept voice/fax calls connected to a SIP trunk on CCM5. My gateway is a different SIP trunk on CCM5. Inbound calls that are CFNA to vm work just fine. The problem is the T38 fax. I can't get the fax to picku...

I'm trying to enable the Extension Mobility service via the Tomcat Manager list (http://server/manager/list) but I get the error you are not authorised to view this page, I then step back one level to http://server/manager which opens the box asking ...

Hello,I have an issue here with our CCM 4.1.2 environment. When dialing from an 7940 phone to another (7940 or other model) phone it takes about 5 seconds before the other phone rings. Meanwhile nothing happens, the only thing that shows up in the di...

Got a customer who's Extension Mobility Logout timers have stopped working since upgrading to CCM4.2 sr1b This worked before and now their phones show as Logout Time Not Set even though the settings are set to True, 13:00, 3, AutoLogout, True and Tru...

dear sir, We have the operator extension number 32006 which are translation pattern configured as 0 will clash for the internal 5 digit calling if more than 1 incoming intercom sessions. It will happened engaged line. Do you think if i create another...

dear sir, We have the operator extension number 32006 which are translation pattern configured as 0 will clash for the internal 5 digit calling if more than 1 incoming intercom sessions. It will happened engaged line. Do you think if i create anoth...

Hi, I have this set up with Outlook 03, works perfectly fine on this area code. Any other I get call cannot be completed as dialed. Thank you in advance for any possible ideas.***EDIT***Sorry to have bothered anybody. I figured it out. Twas missing t...