Other Collaboration Subjects

I don't know how I can to do a forward at secundaries line on phone 7960 & 7970.Example I have ones of these phone that have a primary line 2065 and five secundary line if I select "CFwdALL" just the primary line go to forward, the rest not,and when...

I have a stange issue with Call Forward All,Scenario 1:User forwrds his phone to his cell phone and some one intetnally dials the 6 digit extntion and the call goes to cell phoen and if not answered goes to the VM of cell phone everythign is ok.Scena...

Hello anyone have any kind of experience of using translation profiles in the ephone-dn?I tried to use but it doesn't work at all! Here it is my config:voice translation-rule 1 rule 1 /3001/ /3000/!voice translation-profile test1 translate calling 1!...

Hi,We have a T1 PRI installed for voice and we wanted to use MGCP. The switch type is primary-5essThe issues is in CM there is no 5ess switch type to select is there another that will work.Thanks

Hi,I have just read conflicting reports on IP Communicator, can this be used in CME 3.3?THanks

I am trying to push application to the phones using CiscoIPPhoneExecute object. I can push to the phones successfully, however we need to confirm if the phones have recieved the push. To confirm, we are using CiscoIPPhoneResponse.My problem is that t...

I have a site that requires 7 digit local dialing. I have dialpeers setup for the 7 digit, and 911 and long distance and such... However we have one area code and prefix that the LEC is telling us must be dialed by 10 digits. This is causing issues...

I have a AS5300 connected with a GSM Gateway by E1 (install for call termination). My problem is when I call GW2 via GW1 I get dialtone and when I enter my destination digit string in I immediately get a fast busy.

I have a CME Unity SIP Integration problem. I can access Unity via Message Button. I can get message via UM.. But when trying to access the mailbox via Telephone it wont relay DTMF's... Configdial-peer voice 150 voip destination-pattern 55550.. sessi...

Hi,We have issues with a no-audio path on some calls when the phone is forwarded to voicemail (CfWAll).The PSTN guy (DMS-100) says that he needs to see alerting or progress, but we are no sending it as it answers immediately.We have a MGCP gateway, b...

With a MGCP gateway and CCM 4.1.3 how do you control call type for certain numbers. For instance right now everything shows unknown unknown for all called numbers. I know where this is controlled on the gateway page. On the gateway page all settings ...

I need to make transformation of calling party number for incoming call (CID) on MGCP gateway. I create transformation rule :translation-rule 2 Rule 0 ^0. 0 Rule 1 ^1. 0511 Rule 2 ^2. 0512 Rule 3 ^3. 0513 Rule 4 ^4. 0514 Rule 5 ^5. 0515 Rule 6 ^6. 05...

When I return all rows from the CDR table in the sql database there is no information in there. I have enabled the CDR insert on the publisher, do I need to turn it on some where else?

Hi All,Trying to intergrate a CME with a Nortel PBX. Call trans/forward do work from a VOIP phone to a mobile or PSTN phone (call goes out the router PRI to to Nortel, CME joined to Nortel PBX via PRI, Nortel has another PRI for PSTN world access) Ju...

Hii would like to connect two E1 interface on 3845 Router to simulate E1 traffic.Has anyone a sample config for the two Routers.Thanks Roland