cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
593
Views
0
Helpful
4
Replies

Local SIP calls in G.729r8

rcoelho
Level 1
Level 1

Hello all,

Can any one tell me if is possible to do call’s in G729r8, between local SIP phones register to a CME?

I’m running a LAB with the following equipment and versions:

Router: 3845

IOS: 12.4(4)T1 feature set: IP VOICE

CME: 3.4

Phones: 7960 e 7940

SIP Firmware: 7.4

All versions are compliant according to Cisco.

Everything works fine if I use G.711, but if I use G729r8, is not possible to make calls. I receive the following message from the debugs “No voice codec and no dtmf-relay match”.

I have the config as simple as can be, to register phones and make calls (it works in g711), as you can see:

*********

!

voice service voip

allow-connections sip to sip

sip

registrar server expires max 600 min 60

!

!

!

!

voice register global

mode cme

!

voice register dn 1

number 101

name teste 1

preference 2

label teste1

!

voice register dn 2

number 201

name teste 2

preference 2

label teste2

!

voice register pool 1

id mac 0014.F2B0.8C34

type 7940

number 1 dn 1

max registrations 240

!

voice register pool 2

id mac 0015.2B03.5E35

type 7960

number 1 dn 2

max registrations 240

!

********

Maybe I’m forgetting some thing? Can any one help me???

Thanks

Rui Coelho

1 Accepted Solution

Accepted Solutions

tpestana
Level 1
Level 1

I had the same problem and i think you are hiting the CSCsc16795 "g729r8 interop issue with IP phones".

I resolve my problem,with an upgrade to firmware of the phones to version 8.2.

Regards

Telmo Pestana

View solution in original post

4 Replies 4

tpestana
Level 1
Level 1

I had the same problem and i think you are hiting the CSCsc16795 "g729r8 interop issue with IP phones".

I resolve my problem,with an upgrade to firmware of the phones to version 8.2.

Regards

Telmo Pestana

Hi Telmo,

Thanks for your help. After the upgrade to 8.2 it's now possible to do local sip call's in g728.

One more time, thanks

Best regards

Rui Coelho

Hi,

Did you success local calls in g728 in CME?

Which version of CME did you use?

I am using CME 3.4

with

7905 Firmware CP7905010200SIP040406A

local calls in g711 always

g729 doesnt work

In vhich version CME, 8.2 comes

Please help

I have the same problem,

But in my case, IP Phones are located with WAN connections. Even with G711 codec, it doesn't work.

7905 IP Telephone

CCME 3.4

How can I download versin 8.2?