No. of the active connections of C2600 with NM-HDV-1E1-30E

[h.debelak]

Can I get the no. of the active connections of C2600 with NM-HDV-1E1-30E via snmp ?

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

[m.kuzmicki]

check this out

/usr/local/bin/snmpwalk $ip_number community -O qv .1.3.6.1.4.1.9.10.19.1.1.9.1.3

It sould work cause I wrote some scipts that used this command

but for some time I had no possibility to use it