We have some analog elevator phones we will be connecting to a VG248. These phones do not have a dialpad. On our previous meridan setup they were set to Hotdial 0 (switchboard), as soon as you pickup the handset. How can we set that up with Callmanager 4.13?
The PLAR feature is pretty easy to set-up. Very basic. But I have a similar situation with a different problem:
Elevator connects with Security, but when security hangs up the elevator gets fast busy. there is no handset to hang up, just the button and the button on the box does not disconnect the call either. Is there a way to force the line to hang up when security does?
I've tried changing the Call supervision settings on the VG248 port to no avail.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...