Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1750/1751-V GW support for CME

I've got a 1750 that has been upgraded with a PVDM. I want to upgrade the router to 128M DRAM and 32M FLASH in order to run CME, as shown here:

http://cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00805f5908.html

It says to upgrade the 1750 to 128/32 in order to support CME. However, the following documentation on the 1750 shows it can only support 48MB DRAM and 16MB FLASH:

http://cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a0080092102.html

Can I actually upgrade it to 128/32 or not?

2 REPLIES

Re: 1750/1751-V GW support for CME

Aaron,

The first link talks about 1751-V and not 1750.

HTH

Sankar.

Blue

Re: 1750/1751-V GW support for CME

the maximum DRAM for a 1750 is 48mb as described in the link below:

http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a0080092102.html

you would need a 1751-V, of the 1700 series, to support CME.

(or a 1760/1760-V; as described in the first link you provided in your post)

523
Views
6
Helpful
2
Replies