Hello,
I have 1751 with VIC-2BRI-NT. 2 PVDM-256k-4
Problem: on show runn only 2 voice ports appear
voice port 0/0
voice port 0/1
on show voice dsp i can see 4 ports
voice port 0/0
voice port 0/1
voice port 0/2
voice port 0/3
on dial-peer configuration i can only
use 2 voice ports
docs say that there should be 4 voice ports
if you use 2 PVDM-256K-4
any help appreciated.
