Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1760 dial translations

On a 1760 gateway with a PRI, how do you translate a inbound POTS call that (ie # 515) to an outbound VOIP peer that adds a 0 to the first digit.

I need 555 to translate to 0555. Because the PBX I am connected to always drops the 0.

2 REPLIES
Silver

Re: 1760 dial translations

That is pretty straight forward. Use translation rules on the router.

See http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a0080094681.shtml for more details

New Member

Re: 1760 dial translations

translation-rule 1

Rule 0 ^5.% 05

!

voice-port 2/0:23

translate called 1

!

dial-peer voice 1 pots

incoming called-number .

port 2/0:23

!

dial-peer voice 555 voip

destination-pattern 0555

session target ipv4:

etc...

82
Views
0
Helpful
2
Replies
CreatePlease to create content