04-24-2003 07:38 AM - edited 03-12-2019 11:36 PM
Hi all,
Does anybody know which version, I´ll need to have the
mgcp AND the ccm-manager commands on this platform?
the last i tried was: c1700-sv8y-mz.122-15.T1.bin
VOX/PLUS
many thanks in advance
August
04-24-2003 07:30 PM
I have "c1700-sv8y-mz.122-11.YU.bin" IOS in lab and I have ccm-manager command .
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(11)YU, EARLY DEPLOYMENT REL
EASE SOFTWARE (fc1)
Synched to technology version 12.2(13.1u)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 21-Dec-02 06:20 by ealyon
Image text-base: 0x80008120, data-base: 0x8137482C
ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(11)YU, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
04-25-2003 05:36 AM
Thanks for your answer.
But I have to configure a VWIC-1MFT-E1 and I need the
controller e1 2/0
--> pri-group timeslots 1-31
command, but it won´t work with this version.
Any other hints?
August
04-25-2003 03:47 PM
You need to first make sure that the isdn switch-type is defined globally. Without that the "pri-group timeslots 1-31" under the controller will give error in any ios image version.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide