Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1760-V , QSIG, PBX

Hi all,

I heard different things to the 1760-V, so I have to need informations about this:

We have to link PBXs via IP and we have to use QSIG on the trunk-lines to the PBXs. Could we implement this with the 1760-V routers?

thanks in advance

August

  • Other Collaboration Voice and Video Subjects
1 REPLY
Cisco Employee

Re: 1760-V , QSIG, PBX

If you are just going between 2 PBXs, yes this will work. Use Transparent CCS with the clear-channel codec and we will just pass whatever Qsig messages the PBXs are sending.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800a96c1.shtml

80
Views
0
Helpful
1
Replies