Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2 PRI Trunks On 1 Controller

Hi,

a customer of mine has a 1-port MFT VWIC on his 2811 router and a CCM cluster. What he wants to achieve is to create two separate trunks with 9 b channels each, where 1 set of chanels would be used for one company exclusively, and the other set of channels for a different company. Is something like this possible with Cisco gateways?

Regards,

Dragi

  • Other Collaboration Voice and Video Subjects
1 REPLY
Bronze

Re: 2 PRI Trunks On 1 Controller

You can easily create 2 seperate channel groups when using a voice T1 with Channel associated signalling. Under the T1 controller you would configure the two seperate DS0-groups. For example:

DS0-group 0 timeslots 1-9 type E&M-fgb dtmf dnis

DS0-group 1 timeslots 10-18 type E&M-fgb dtmf dnis

this would create two seperate T1 voice ports using 9 channels each.

see the following link for more on Voice T1 CAS configuration:

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_configuration_example09186a00800fa115.shtml

88
Views
0
Helpful
1
Replies
This widget could not be displayed.