Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

20 Trunks, 2 PRI in 2800

hi; according to a requirement i am in need to offer 20 trunks(5*4FXO)and(1*VWIC-2MFT-E1); how can i place it using 4 WICs and 1 NM present in 2811...

If not possible than kindly suggest alternatives

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: 20 Trunks, 2 PRI in 2800

I would recommand to place 4 of the FXOs into the HWIC slots and get NM-HDV2-2T1/E1 which has onbard VWIC2-2MFT-E1 card and one open VIC slot that you can use for the 5th FXO.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml

HTH,

Chris

1 REPLY
Hall of Fame Super Silver

Re: 20 Trunks, 2 PRI in 2800

I would recommand to place 4 of the FXOs into the HWIC slots and get NM-HDV2-2T1/E1 which has onbard VWIC2-2MFT-E1 card and one open VIC slot that you can use for the 5th FXO.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml

HTH,

Chris

122
Views
0
Helpful
1
Replies
CreatePlease to create content