Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

2621XM, AIM-Voice-30, VWIC-MFT-E1, CCM3.2 -> MGCP or H.323?

Hi,

i think the title tells it all. How do i configure the voice gateway from ccm with the components described above?

I think, MGCP shoul be possible but when we choos 26xx-gateway in the "add mgcp gateway" dialog there is no chance to enter Slot0 as destination for the voice int. Any hints or solution? Thanks.

3 REPLIES
Silver

Re: 2621XM, AIM-Voice-30, VWIC-MFT-E1, CCM3.2 -> MGCP or H.323?

AIM voice 30 does not have MGCP support yet. You will need to run H323

New Member

Re: 2621XM, AIM-Voice-30, VWIC-MFT-E1, CCM3.2 -> MGCP or H.323?

Thanks for information. We will use H323 and wait for the mgcp support...

Is it so difficult or so unimportant to support those configurations (belongs also to all kind of bri connections - we are from germany...)?

Silver

Re: 2621XM, AIM-Voice-30, VWIC-MFT-E1, CCM3.2 -> MGCP or H.323?

The AIM is easy to use and will give up to 30 voice channels on a PRI interface. If you want to run BRI, you will need a NM-2V and a BRI VIC card as well as the AIM is only designed to work with a E1/T1 VWIC card.

137
Views
0
Helpful
3
Replies
CreatePlease to create content