Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

2811 - Right fax - dial-peer / num-exp question

Hi I have a 2811 with 2 PRI and I have a little question regarding the configuration of a num-exp and dialp-peer with right fax.

here is my actual config

dial-peer voice 5555555512 voip

destination-pattern 5555555512

session target ipv4:192.168.0.34

incoming called-number 5555555512

codec g711ulaw

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none

!

!

With no num-exp it is working fine.

Right now the problem is I have a dial-peer for every Fax, I would like to minimize the configuration and instead use only one dial peer and have a num-exp or something else that take the call-fax and give it to the dial peer,   if it's possible.

ex:

num-exp 5555555512 8000

num-exp 5555555513 8000

num-exp 5555555514 8000

num-exp 5555555515 8000

dial-peer voice 8000 voip

destination-pattern 8000

session target ipv4:192.168.0.34

incoming called-number 8000

codec g711ulaw
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback none

*of course I have try that and It is not working, well the tech on site told me he did'nt recived the fax in the department mailbox.

Maybe because right fax wasn't able to see the Called-number and give that to the right department mail-box.

any idea ?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 2811 - Right fax - dial-peer / num-exp question

you cannot replace the called number like that and expect things to work.

If your numbers can be summarized with pattern in destination-pattern, you can do that.

otherwise you need to keep on DP per number, and tha is not a problem whatsoever.

2 REPLIES
Hall of Fame Super Gold

Re: 2811 - Right fax - dial-peer / num-exp question

you cannot replace the called number like that and expect things to work.

If your numbers can be summarized with pattern in destination-pattern, you can do that.

otherwise you need to keep on DP per number, and tha is not a problem whatsoever.

Re: 2811 - Right fax - dial-peer / num-exp question

thanks a lot

1065
Views
0
Helpful
2
Replies
CreatePlease to create content