08-22-2003 01:53 AM - edited 03-13-2019 01:18 AM
Hi! I have a 3660 configured as H.323 gateway, and i'm planning to migrate it to MGCP.
IOS:12.2(11)T9, Service Provider
NM-HDV with E1-QSIG to a PBX.
With this IOS, is the change posible?.
Thank you.
08-24-2003 10:34 AM
Yes it is possible with that IOS. Here is a document you can look at this link :
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a00801ad22f.shtml
Taimoor
08-24-2003 02:06 PM
If you are doing this with callmanager, please use the IOS reccomended for the version of ccm that yoiu are running according to this:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm
08-24-2003 09:47 PM
Thank you. I've tried, but some commands are not recognised - ej: ccm-manager.
09-03-2003 09:19 AM
I had the same problem until I tried the T-train. Now I'm running version 12.2(11)T9, because it's the only one which does't require more than 16MB flash.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide