Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3660, H.323 to MGCP migration

Hi! I have a 3660 configured as H.323 gateway, and i'm planning to migrate it to MGCP.

IOS:12.2(11)T9, Service Provider

NM-HDV with E1-QSIG to a PBX.

With this IOS, is the change posible?.

Thank you.

4 REPLIES
Silver

Re: 3660, H.323 to MGCP migration

Yes it is possible with that IOS. Here is a document you can look at this link :

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a00801ad22f.shtml

Taimoor

Cisco Employee

Re: 3660, H.323 to MGCP migration

If you are doing this with callmanager, please use the IOS reccomended for the version of ccm that yoiu are running according to this:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/ccmcomp.htm

New Member

Re: 3660, H.323 to MGCP migration

Thank you. I've tried, but some commands are not recognised - ej: ccm-manager.

New Member

Re: 3660, H.323 to MGCP migration

I had the same problem until I tried the T-train. Now I'm running version 12.2(11)T9, because it's the only one which does't require more than 16MB flash.

75
Views
0
Helpful
4
Replies