Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
tim
New Member

3660 Voice using Pri-Qig, Signalling and one speech or disconnect

I have set up a 3660 2 x MFT 60 channels and distubruting both Voice and Data Service to 4 locations All seems to be working but I am having problems

with one way speech. I would like to add more site but need to clean this one way speech problem.

This configuration is VOFR over Satellite (NOT VOIP) delay 600 millisec

Ios ver c3660-js-mz-122-7b.bin.

256 Memory and I/O mem set to 40% so memory is not a problem

Suggestion Please

1 REPLY
Cisco Employee

Re: 3660 Voice using Pri-Qig, Signalling and one speech or disco

These URLs deal with voip mostly, but try the sections where it discusses putting the progress_ind commands under the dial peers. If that does not work, open a case with TAC.

http://www.cisco.com/warp/public/788/voip/ringback.html

http://www.cisco.com/warp/public/788/voip/busytone.html

http://www.cisco.com/warp/public/788/AVVID/fix_1way_voice.html

107
Views
0
Helpful
1
Replies
CreatePlease to create content