Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3725-SRST config via MGCP

Does anyone know if this is availible now. if so, what code of IOS and SRST? Can't find anything on CCO.

  • Other Collaboration Voice and Video Subjects
4 REPLIES
Blue

Re: 3725-SRST config via MGCP

12.2(11)T

New Member

Re: 3725-SRST config via MGCP

No, SRST doesn't work with MGCP, it should work with h323.

New Member

Re: 3725-SRST config via MGCP

you can configure mgcp fallback to h323

New Member

Re: 3725-SRST config via MGCP

I have MGCP sucessfully configured.on PRI

Version 12.3(4)T

ccm-manager fallback-mgcp

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 10.X.X.X (ccmpub)

ccm-manager config

controller T1 1/0

framing esf

crc-threshold 320

clock source internal

linecode b8zs

pri-group timeslots 1-24 service mgcp

interface Serial1/0:23

no ip address

no logging event link-status

isdn switch-type primary-qsig

isdn incoming-voice voice

isdn bind-l3 ccm-manager

no cdp enable

call-manager-fallback

secondary-dialtone 9

max-conferences 8

transfer-system full-consult

timeouts ringing 30

ip source-address 10.X.X.X port 2000 (3725 IP)

max-ephones 35

max-dn 36

system message primary Cisco SRST-fallback mode

dialplan-pattern 1 15551212.... extension-length 4

transfer-pattern .T

keepalive 10

access-code pri 9 direct-inward-dial

voicemail XXXX

call-forward busy XXXX

call-forward noan XXXX timeout 12

moh music-on-hold.au

time-format 24

152
Views
0
Helpful
4
Replies
This widget could not be displayed.