4-digit dialing from Analog Centrex to DID Stations
We are running UCM 6.x and have migrated over 2,500 phones from Centrex to DID stations and IP phones. Guests come into certain sites and need to contact caseworkers from analog phones where the lines are partially restricted by the phone company. Full restrictions on the lines will not work with the DID station #s but with the Centrex. Partially restricted analog #s disallow long distance but allow callers to contact IP phone users AND dial locally. However, callers are on the phones for long periods of time which is undesireable. We have suggested that the analog phone lines be migrated to DID stations and cutover to IP phones. I suspect that we can setup a new CSS to restrict the phones to dialing only #s that are DID/IPT stations. Pls confirm that I am thinking of this correctly.
Re: 4-digit dialing from Analog Centrex to DID Stations
You are most correct my friend :) You can narrow/restrict the abilty make Local calls and only allow calls that are DID/IPT phones. We have many levels of restriction from full-on to almost nothing when it comes to where you can call.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...