All IOS available on the CCO are working IOSes. You can choose the latest IOS for the AS5300 but you may also have to change the vcware on the VFC card to stay compatible with the main IOS. You can check the compatibility from the following URL
Well unless the release IOS is GD there are no gaurantees that you will never come across any bug on the IOS. As environments differ from one site to another, a bug encountered at one site may never appear on another site. Generally speaking you want to run an IOS that has been on CCO for 4-6 months if you want to feel comfortable with the stability. You can always check on the Cisco IOS page to see when was the IOS put on CCO for the first time.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...