Have a Digital access t1 plugged into a 6608 blade on a 6509 running 7.3.1. 6608 is registered and L1 is up. Layer 2 up and down. Tracy shows Invalid TEI and HDLC link failure. According to TAC and SWB the T1 PRI and the 6608/CM are configured correctly. Have tried two different 6608's. Won't stay up and can't make calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...