04-09-2003 01:40 PM - edited 03-12-2019 11:24 PM
Does anyone know if a 6608 module (configured as a PRI) will "by default" set DSCP values for control traffic and RTP stream or does this have to be done via ACLs?
04-09-2003 02:07 PM
Hi James,
The Catalyst switch will indeed treat the 6608 internal ports as trust-cos. For that reason, the 6608 marks RTP packets with an internal CoS value os 5. In addition, the default cos-to-dscp mapping is to map CoS=5 to DSCP=40.
Regards,
Mike.
04-10-2003 04:42 AM
Thank you for the response. I am being told by Cisco that the 6608 does not mark traffic and that ACLs are required.
Another question, since traffic from the PSTN has no CoS value does the 6608 remark all traffic coming from the PSTN to Cos of 5 (control and media)? Can you point me to supporting documentation on this?
04-10-2003 06:11 AM
Hi -
I agree with Mike, the 6608 automatically sets the proper CoS values and the 6509 (with a PFC card) trusts the values.
I cant find any supporting documentation though.....
-Jaret
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: