Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

7815 and Callmanager 40 support

Clearly, the CM compatibility matrix indicates the following servers are not supported with 4.0 and later.

MCS7820, MCS7822, MCS7830, IBM x330 800MHz-1GHz and IBM x340.

I have a 7815 with 1 Ghz processor, (Not sure if its a IBM X330), with 512 MB RAM. Will this server support CM 4.0 (only qith 1 ghz processing power). The Server has 2 slots, so I believe you can put two 512 MB sticks in there to upgrade the RAM to 1 gig.

Any thoughts ??

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: 7815 and Callmanager 40 support

Hi Shanky

See this link:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html

It should work fine, you'll just need to beef up your memory as suggested in the document referenced above...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

Re: 7815 and Callmanager 40 support

Hi Shanky

See this link:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html

It should work fine, you'll just need to beef up your memory as suggested in the document referenced above...

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Re: 7815 and Callmanager 40 support

Aaron,

That answers it! Thanks for your help! You sawed me a lot of time.!

94
Views
0
Helpful
2
Replies
CreatePlease to create content