Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

7905 h323 to sccp FW

Hi,

I have a 7905 with the H.323 FW running, now I want to go back to skinny FW.

Regardless, what ever I put the the tftp file, the phone downloads the profile, but does not perform an download of the SCCP SW.

Any hint?

Christian

4 REPLIES
Anonymous
N/A

Re: 7905 h323 to sccp FW

The procedure for "7905G upgrade from SCCP to H323 image" should work both ways .

Community Member

Re: 7905 h323 to sccp FW

actually it doesn't.

But I found it:

go to the Maintainance Mode (* 0 and the left Softkey) and perform the download similar to the ATA18X within its Voicemenus. All other ways don't work (at least if you are on h323 ver 1.0)

Christian

Community Member

Re: 7905 h323 to sccp FW

Hi,

How did you download the SCCP image to 7905G? Could you explain it?

Thanks

Community Member

Re: 7905 h323 to sccp FW

I have it no complete in mind (and also I dont have the 7905 to repeat the download anymore), but if you read the upgrade procedures for the ATA186, and type the "*" commands for the ATA voicemenu on the keyboard of the 7905, you will be sucessfull!

To get into the maintainance mode (press "*" "0" and the left Softkey) was the hardest part.

Hope this helps.

Christian

135
Views
0
Helpful
4
Replies
CreatePlease to create content