7905 h323 to sccp FW

czorr · ‎04-15-2004

Hi,

I have a 7905 with the H.323 FW running, now I want to go back to skinny FW.

Regardless, what ever I put the the tftp file, the phone downloads the profile, but does not perform an download of the SCCP SW.

Any hint?

Christian

Report Inappropriate Content · ‎04-21-2004

The procedure for "7905G upgrade from SCCP to H323 image" should work both ways .

czorr · ‎04-22-2004

actually it doesn't.

But I found it:

go to the Maintainance Mode (* 0 and the left Softkey) and perform the download similar to the ATA18X within its Voicemenus. All other ways don't work (at least if you are on h323 ver 1.0)

Christian

metin · ‎05-24-2004

Hi,

How did you download the SCCP image to 7905G? Could you explain it?

Thanks

czorr · ‎05-27-2004

I have it no complete in mind (and also I dont have the 7905 to repeat the download anymore), but if you read the upgrade procedures for the ATA186, and type the "*" commands for the ATA voicemenu on the keyboard of the 7905, you will be sucessfull!

To get into the maintainance mode (press "*" "0" and the left Softkey) was the hardest part.

Hope this helps.

Christian