I'm guessing that in CME you are using something like "Overlays" to accomplish this type of setup which is not available in CCM. The spot that you are seeing when you scroll up and down is actually reserved for the Privacy Button and cannot be used for anything else.
The only way to "simulate" a second line on a 7911 in CCM is to configure the new line/DN as a CTI-RP that is setup to Call Forward All to the existing 7911 Line 1 DN. You should receive the proper CLID when call route through this new DN so that the call can be answered appropriately.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...