Straight out of the box, the menu on the 7920 allows you to choose a different ring tone, but the actual tone remains the same. Is there anything else that needs to be done, like using the Configuration Utilty, or even on CCM4.2, so that users can actually change the ring tones?
I have gone thru this document before I posted the query. I am able to navigate thru the menu, go thru the different ring tones, but selecting one does not really change the actual sound. Still looking for answers.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...