Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7936 Conferencing problem

Setup: CCME 4.1, ISR2821,4Fxo ports PVDM2-32, configured hardware conference

Problem: Unable to press softkey "ConFrn" + phone hangs

Scenario: 2 callers are on the line, and when the creator wish to dial another party for conference, the "CONFRN" softkey is shown on the phone, but it does not function at all. Later which the phone just hang. We have to power it off and on again. What would be the problem? We have no problem at all doing hardware conferencing with the 7960g ip phones

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 7936 Conferencing problem

Which FW on the 7936? Can you check thatyou are using the latest and then try again ?

5 REPLIES
Hall of Fame Super Gold

Re: 7936 Conferencing problem

Which FW on the 7936? Can you check thatyou are using the latest and then try again ?

New Member

Re: 7936 Conferencing problem

thanks, the latest firmware solved my problem

New Member

Re: 7936 Conferencing problem

Hi J_Vansen_S,

I'm having the exact same problem with a new CME4.1 deployment. I've upgraded to 3.3(13) and also tried 3.3(12). Have problem with both versions.

What version are you using?

This is very strange, as all other phones (7941, 7961) start conferences just fine. The 7936 can do the first ad-hoc conference, then have to be restarted to do another...

Thanks,

-Dave

New Member

Re: 7936 Conferencing problem

Hello,

An update to everyone. 7936 SCCP firmware 3.3(14) fixed this issue.

Thanks,

-Dave

New Member

Re: 7936 Conferencing problem

Excellent, a customer of mine is having the exact same problem. They upgraded to 3.3(12) on their own but the problem remained. I will tell them to upgrade further to 3.3(14).

159
Views
0
Helpful
5
Replies