Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

7936/DHCP

7936 is re-configured to use DHCP to get IP address, it can get TFTP server address correctly but not IP for itself, it still stuck with IP address which is previously configured.

I tried to retore factory default config and it didn't work. If I confiured a static IP, it works fine.

1 REPLY
Anonymous
N/A

Re: 7936/DHCP

Looks like the DHCP server is not properly configured to provide the value to the IP Phones. You can refer to the following documents to make sure your configuration is correct.

Configuring Windows 2000 DHCP Server for Cisco CallManager

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800942f4.shtml

Solving DHCP and TFTP Problems with Windows 2000 and CallManager IP Phones

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080093fbe.shtml

355
Views
0
Helpful
1
Replies
CreatePlease to create content