Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7940 Sip Call Manager 5.1

I am wondering if I can decrease the interdigit time out for a 7940 running SIP in call manager 5.1. Right now after I press the last digit it takes around 10 seconds before the number dials. My second question is with a 7940 running SIP is there anyway to just dial a number without selecting the line first? right now I have to select a line go offhook first prior to being able to dial.

Thanks

1 REPLY
Bronze

Re: 7940 Sip Call Manager 5.1

If the user dials digits but then does not press the Dial softkey or the # key, the phone will wait for inter-digit timeout (10 seconds by default) before sending a SIP INVITE message to Cisco Unified CallManager.The inter-digit timer is not configurable as such. However it can be controlled via the dialplan. If you don't have a dial plan specified for the phone simply create one with the following rule. The timeout is your new inter-digit timer.

175
Views
0
Helpful
1
Replies