I've recently acquired a nice new 7941 phone for testing out SIP, and at present am attempting to do so in a non CCM environment (but that may change in the future).
Can anyone provide me with details of where I can find, or better still, a sample basic SEP<macaddress>.cnf.xml file for this? Something that I can put in the SIP proxy, userID, password and specify the codec (g729) at least for starters - and if there is documentation on other parameters that I can read up on my own then that'd be simply brilliant.
The network side is all OK, I have IP connectivity and tftp working fine, but it's the config file syntax which is tripping me up.
The 7940 configs were of course easy to do this with but I don't think the 7941 supports the old style config anymore and expects everything in some undocumented xml format :(
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...