Remote site has 7960 phones, Linksys WRT54-G wireless, and Cisco 827 DSL coming back to a callmanager 3.3 When we power on a 7920 phone the 7960 phones will unregister with the call manager, but the 7920 will work fine. Turn off the 7920 and the 7960's come back online. We put an Aironet 350 out there - same thing. We put an Aironet 1200 AP out there and both the 7960's and 7920's work. All of the devices are plugged into a non-cisco switch.
I've been looking on this forum and CCO, but no luck. Has anyone run into this, have any ideas, or can point me in the right direction.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...