Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

7961G with Expansion Module 7914

hi,

a simple question.

i will buy a 7961G phone with an expansion module 7914. The 7961G will be powered with PoE. i cannot find out if its possible to connect the module without an external power cube if i power the phone with PoE.

thx

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 7961G with Expansion Module 7914

Hey Paolo,

Here is the breakdown I have always used;

Cisco Unified IP Phone Expansion Modules 7914

Cisco 7960 Power Source

Items to Order

1 7914 with 7960 with In-line PoE (you need to order the following)

One, Cisco Unified IP Phone Expansion Module 7914

One, single footstand

One, power cube

One, country cord

1 7914 with 7960 with Local power (cube)* (you need to order the following)

One, Cisco Unified IP Phone Expansion Module 7914

One, single footstand

2 7914's with 7960 with In-line or local power** (you need to order the following)

Two, Cisco Unified IP Phone Expansion Module 7914 ExpansionModule

One, double footstand

One, power cube

One, country cord

* A single Cisco Unified IP Phone Expansion Module 7914 can receive power from a locally-powered (power cube) Cisco Unified IP Phone.

** Local power must be connected to the first Cisco Unified IP Phone Expansion Module 7914. This supplies power to both Cisco Unified IP Phone Expansion Modules 7914s.

From this excellent doc;

http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008883d.html

Hope this helps!

Rob

PS: Nice to have you back from your TROUBLESHOOTING TRAVELS!

4 REPLIES
Silver

Re: 7961G with Expansion Module 7914

Hi, take a look at the next url:

http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008883d.html

You can see a table with the power requeriments, if you have a 7961G with PoE you'll need an external power cube for the 7914 module to work.

Regards.

Hope this helps, if so pls rate post

Community Member

Re: 7961G with Expansion Module 7914

thx. now i know what i have to buy.

Hall of Fame Super Gold

Re: 7961G with Expansion Module 7914

Actually, the first additional module will power with Poe from the phone. If you have a second 7914, that will require a separate power cube.

Hall of Fame Super Red

Re: 7961G with Expansion Module 7914

Hey Paolo,

Here is the breakdown I have always used;

Cisco Unified IP Phone Expansion Modules 7914

Cisco 7960 Power Source

Items to Order

1 7914 with 7960 with In-line PoE (you need to order the following)

One, Cisco Unified IP Phone Expansion Module 7914

One, single footstand

One, power cube

One, country cord

1 7914 with 7960 with Local power (cube)* (you need to order the following)

One, Cisco Unified IP Phone Expansion Module 7914

One, single footstand

2 7914's with 7960 with In-line or local power** (you need to order the following)

Two, Cisco Unified IP Phone Expansion Module 7914 ExpansionModule

One, double footstand

One, power cube

One, country cord

* A single Cisco Unified IP Phone Expansion Module 7914 can receive power from a locally-powered (power cube) Cisco Unified IP Phone.

** Local power must be connected to the first Cisco Unified IP Phone Expansion Module 7914. This supplies power to both Cisco Unified IP Phone Expansion Modules 7914s.

From this excellent doc;

http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008883d.html

Hope this helps!

Rob

PS: Nice to have you back from your TROUBLESHOOTING TRAVELS!

219
Views
5
Helpful
4
Replies
CreatePlease to create content