08-03-2006 07:57 AM - edited 03-13-2019 02:27 PM
Hi, I'm configuring a CallManager Express 3.2. I'm installing two types of IP Phones: 7940G and 7970G. I haven't could find the firmware for the 7970G IP Phone for this version of CallManager Express. Thanks.
08-03-2006 08:23 AM
this would be the same phone load(s) that you can download from CCO.
see this link for latest the 7970 load: (cco account w/software maintenance required)
08-03-2006 08:34 AM
Depending on the release of 3.2 that you're using, you can either use 6.0(3)SR1 or 7.0(1). Both can be found here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-iostsp
Also, take a look at this link regarding configuring the 7970 with CME 3.2.1.
Hope this helps. If so, please rate the post.
Brandon
08-03-2006 10:15 AM
Thanks for your help. This CallManager Express doesn't have any release, the version is 3.2. I just tried to use firmware for CCME 3.2.1, however it doesn't work. If you have other suggestion, please send it to me.
08-03-2006 11:11 AM
On the router, type "show telephony-service". You should see your version at the top.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: