Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7970 - Time still not right even with DST fix

I have a cme lab setup with several types of phones 7912's, 7960's and a 7970, all the phones except the 7970 show the correct time, the 7970 is still one hour behind even though I have applied the latest firmware which had the dst fix to it, I have tried resetting the phone, reloading the router, resetting the clock and updating calendar on the router, removing telephony services from the router and reloading then running telephony services setup again, I have tried downloaded the firmware to earlier versions and back to latest version still no joy.

Anyone still having these time issues ?

12.4(11)T / CME 4.0(2)

Gui 4.0.3.1a

7970 Firmware version SCCP70.8-0-4SR2S

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: 7970 - Time still not right even with DST fix

Have you also set the correct time-zone under telephony-service?

If not, set that and do a create cnf-files.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

Re: 7970 - Time still not right even with DST fix

Have you also set the correct time-zone under telephony-service?

If not, set that and do a create cnf-files.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: 7970 - Time still not right even with DST fix

Thanks Aaron did the trick, removed telephony services that many times during lab testing must of forgot to put the timezone back on at some point.

186
Views
0
Helpful
2
Replies