Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AA + SRST

I would like to configue AA on a router with SRST. I am looking for something simmilar to "Cisco CME Basic Automatic Call Distribution and Auto-Attendant Service", which is working with CME. That means, someone calls in, hears the greetings, can choose between multiple optionsd ("for registration dial 1, for bookstore dial 2 etc"), and eventualy dial the extension. Does anybody know how can that be accomplish with SRST, and if there is a script that I can use.

4 REPLIES

Re: AA + SRST

There are AA tcl files that you can download and setup a basic AA on the router. This AA may be activated from a dial-peer which matches an incoming pilot number and calls an application that references to the TCL script loaded on flash. Here is a very good link to setting up AA on a router. You can use this with CCME or SRST.

http://www.convergencefactory.com/cme/index.html#How_do_I_set_up_a_basic_automated

This wont be a true replacement for BACD in CME.

HTH

Sankar

PS: please remember to rate helpful replies!

New Member

Re: AA + SRST

I am having trouble getting this to work. Follwed all the instructions on this website, but every time I try to dial call I get an "%CALL_CONTROL-6-APP_NOT_FOUND: Application ccmeaa in dial-peer

7 not found. Handing callid 297 to the alternate app DEFAULT' and a second dial tone. I can dial an extension at this point in time, but no prompts.

Re: AA + SRST

Can you paste your configs and the actual Syslog message. Note that in newer IOS, app command is depecated and replaced by service command.

New Member

Re: AA + SRST

!

!

ccm-manager fallback-mgcp

ccm-manager mgcp

no ccm-manager fax protocol cisco

ccm-manager music-on-hold

ccm-manager config server 10.100.9.1

ccm-manager config

interface FastEthernet0/0.224

description BNA Voice Vlan

encapsulation dot1Q 224

ip address 172.24.1.254 255.255.255.0

call application voice aa flash://its_CISCO.2.0.0.0.tcl

call application voice aa operator 2430

call application voice aa aa-pilot 2431

call application voice aa language 1 en

call application voice aa set-location en 0 flash://

!

voice-port 0/1/0

timing hookflash-out 500

!

voice-port 0/1/1

timing hookflash-out 500

!

!

dial-peer voice 1 pots

preference 1

destination-pattern 911

clid network-number 61525922230

clid second-number strip

port 0/1/0

!

dial-peer voice 3 pots

preference 1

destination-pattern 9[2-9]......

clid network-number 61525922230

clid second-number strip

port 0/1/0

forward-digits 7

!

dial-peer voice 4 pots

preference 1

destination-pattern 91[2-9]..[2-9]......

clid network-number 61525922230

clid second-number strip

port 0/1/0

forward-digits 11

!

dial-peer voice 6 pots

incoming called-number .

no digit-strip

direct-inward-dial

port 0/1/0

!

dial-peer voice 11 pots

preference 2

destination-pattern 911

clid network-number 61525922230

clid second-number strip

port 0/1/1

!

dial-peer voice 13 pots

preference 2

destination-pattern 9[2-9]......

clid network-number 61525922230

clid second-number strip

port 0/1/1

forward-digits 7

!

dial-peer voice 14 pots

preference 2

destination-pattern 91[2-9]..[2-9]......

clid network-number 61525922230

clid second-number strip

port 0/1/1

forward-digits 11

!

dial-peer voice 16 pots

incoming called-number .

no digit-strip

direct-inward-dial

port 0/1/1

!

dial-peer voice 999010 pots

application mgcpapp

port 0/1/0

!

dial-peer voice 18 pots

application aa

port 0/1/1

!

!

!

call-manager-fallback

secondary-dialtone 9

max-conferences 16

limit-dn 7910 1

limit-dn 7935 1

limit-dn 7940 2

limit-dn 7960 6

ip source-address 172.24.1.254 port 2000 strict-match

max-ephones 36

max-dn 128

alias 1 2230 to 2430

moh music-on-hold.au

!

I dial in and am getting a second dial tone which allows me to dial and extension. But I really need the AA functionality to let users know to dial an extension.

Thanks

210
Views
0
Helpful
4
Replies