04-04-2006 05:30 PM - edited 03-13-2019 12:46 PM
I have two sites A and B setup with AAR. If A calls B and there is no bandwidth AAR works fine. However if user B setup call forward or busy to another phone AAR does not work at all. All I get is a quick beep on B and A get disconnected. Is this a bug or limitation of AAR?
CM is 3.3.4
Thanks
04-04-2006 05:45 PM
I will test this in lab here soon. The version I will test this on is 3.3.3. Are you CForwarding from B to A via the 4 digit extension ? Have you set AAR prefixes or external phone number masks on the phones properly ?
Sankar
PS: please remember to rate posts!
04-04-2006 08:20 PM
Yes I call from A to B, but on B phone I set the call forward and busy to reception. Phone B is onhook. I have set all the parameters correctly because phone B will work if I take out CFD and Call Busy.
Thanks
04-04-2006 08:34 PM
Call phone B internally set callforward and busy to reception and check whether its working or not it can be an issue partition and Calling Search Space.
04-12-2006 05:02 PM
Any luck on getting this tested on the labs?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide