Is there a way to create a list of AbbrDial's and make is accessable on all phones? Today we have route patterns that all users can dial, which is used as a Corporate speed dial list. We just brought our first branch office online and if a branch users dials one of the route patterns that call would go out the corporate office and we would like it to go out the branch office PRI. So it looks like the AbbrDial might be the best option if we can load them for all phones.
Best bet would be to have branch offices in a different partition then create a translation patern for that partition. Each site could even use the same Corporate speed dial numbers but you could send it out the local PRI.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...