cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5558
Views
0
Helpful
2
Replies

Acceptable jitter on the WAN

emorgan
Level 4
Level 4

Hi there,

I am deploying IP telephony across a WAN and my WAN guys are asking what is the maximum jitter I will accept. I have read all the CCO documents I could find but no guidelines as to an acceptable jitter range for AVVID.

I am using 79xx phones and 12.2 IOS MGCP gateways with default playout.

I have the "150ms" figure for delay, but nothing for jitter.

Thanx,

Eric Morgan

2 Replies 2

travis-dennis_2
Level 7
Level 7

From Cisco Networkers 2002 in Orlando in the handout for the session entitled " Design Guidlines for Voice over IPSec VPN Deployments"

Packet Loss <=1%

Delay<=60ms One Way

Jitter<=20ms

Maybe not exactly what you needed but the quickest thing I could come up with. If I see anything else I will pass it on.

jcx233
Level 1
Level 1

Hello Eric,

I found a Cisco pdf that states

loss<1%

delay 150-200ms

jitter 30ms

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns17/c649/ccmigration_09186a00800d67ed.pdf

Tom Truskolawski

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: