Access Codes in CCM 3.3(4)

[luisfe70]

Hi, i have a 3.3(4) 2 server cluster of callmanagers, and i need to restrict the calls depending of the users with access codes like in a PBX, i would want to know if this is posible. Until i know i can do this with partitions and calling search spaces, but the phones stay free to dial out to any external number.

Thanks

Luis Felipe

[Chris Deren]

starting with CCM 4.1 Cisco introduced Forced Authorization Codes (FAC), so you can either upgrade or use CSS/paritions.

Another option is to use Extension Mobility, and require all users to login before making calls.

HTH, please rate all posts!

Chris

[luisfe70]

thanks a lot.

Luis Felipe

[thisisshanky · Accepted solution]

Luis,

Check this link

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/sys_ad/3_3_4/ccmfeat/fsfaccmc.htm

You can enable FAC and CMC on 3.3.4.