access rules cme 4.1

[m.rezzilli]

Hi guys

someone you can help me?

I have a problem of rules with a cme 4.1

I have an incoming line abiltata to the two figures as extension incoming sull - while internally I am having three figures

the problem and that in entry everything works but in exit I don't succeed in making to visualize the complete number with the number the inside but only the root

here following I send you the configuration that I have performed:

voice translation-rule 50

rule 1 / ^ \ (. * \) / / \1 / type unknown unknown

rule 2 / ^ \ (. * \) / /0\1 / type national national

rule 3 / ^ \ (. * \) / /00\1 / type international international

!

voice translation-rule 51

rule 1 / ^5 \ (.. \) / /3989005\1 /

!

voice translation-profile coming

translate calling 50

!

voice translation-profile outgoing

translate calling 51

!

voice-port 0/0/0:15

translation-profile incoming coming

!

[paolo bevilacqua · Accepted solution]

Hi,

Looks like you have not: applied yet "coming" (che significa "venendo" :).

Then check with "debug isdn q931" and "term mon" the number you are sending out. Sometime, TI makes impossible to send out DID outgoing even if you have it working incoming.

Note: your rule 50 can be rewritten more concisely as:

rule 2 // /0/ type national national

rule 3 // /00/ type international international

and similarly 51

rule 1 /^5/ /3989005/

[m.rezzilli]

hi Paolo thanks for the support

but have not understend! recommend me of rewriter the rules of coming

to make to see my inside number when I externally call?

[m.rezzilli]

hi Paolo

have tried to plan the suggested rules!

but it doesn't change the result

perhaps mistake something but I don't understand where

can you help me?

[paolo bevilacqua]

Do "debug isdn q931" and "term mon" to see which number are you sending out.