Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Add IP Phone firmware

I have a CallManager version 4.0(2a), I need to add the firmware for IP Phone 7911 and 7937G, but are not listed on Firmware Load Information option, I already have the files on TFTPPath but what is missing??

Thanks for your help.

JC Arias

5 REPLIES
Hall of Fame Super Gold

Re: Add IP Phone firmware

You are missing the Device Pack files.

Re: Add IP Phone firmware

Thanks for your answer Paolo, this is my first time procedure, could please guide me a little more?? Those Device Pack files can be downloaded from Cisco site??

I search for information this, but I can't find it.

Thanks again.

Re: Add IP Phone firmware

I think I found the procedure, thanks

Cisco Employee

Re: Add IP Phone firmware

Actually there is no support for 7937 on your version

Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

To register the Cisco Unified IP Conference Station 7937G with Cisco Unified Communications Manager releases 7.0, 6.1, and 6.0 and Cisco Unified CallManager releases 5.1, 4.3, 4.2, and 4.1, follow these steps:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7937g/firmware/english/1_3_3/release/notes/37rn133_2.html

for 7911

Supported CallManager Versions

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7906g_7911g/firmware/7_2_3/english/release/notes/11R723sc.html#wp1031083

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Add IP Phone firmware

Thanks for your time Jaime, I'll work on it.

Regards,

172
Views
4
Helpful
5
Replies