BT inform me that it is the european standard to not present the leading zero in incoming calls to my router from the pstn. What is the neatest, most scalable way to add a leading zero to every incoming number so that it is presented correctly on the IP Phone for my users?
Is there a way to change the caller ID only for the numbers under the "Directories" button on the IP phone? The problem is that the useers must dial 9 (escape) and then 1 (pstn escape) to dial long distance numbers. Is there a way to change the caller ID presentation only for these numbers? I don't want to add confusion to biling records and other caller ID presentations on phones.
it has to be done for all calls and there's something else... international call will come in like 32...... for belgium for example you can fix this also but you have to use h323 for your gateway of course
It may be helpful for you to give the forum a better understanding of your environment. Things that would be helpful would be gateway hardware, signalling protocol you have chosen, version of call manager, etc.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4