Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Adding subscriber servers to an existing 3.3(2C) cluster

Our AVVID network is growing and more servers are needed. The problem is the new servers are failing to install, with an error about being unable to launch the DCD\setup.exe.

The Publisher and existing subscribers are using the A/D plug-in, and members of our domain. Browsing the knowledge base here, it looks like I need to revert the servers back to the Cisco Directory and remove the servers

from the domain.

This is a stab in the dark guess, as the install does not generate any logs, and the Event View has an entry with the same error as the pop-up.

I opened a TAC case, but they think I have a problem installing the A/D plug-in, and don't come online for another 10 hours, so I thought I'd try here

1 REPLY
Cisco Employee

Re: Adding subscriber servers to an existing 3.3(2C) cluster

Remove the servers from the domain, add the new subscibers and then make them all domain members. This should work without going back to DCdirectory.

Not sure if this method is 'officially' supported, but it think it will work.

92
Views
0
Helpful
1
Replies
CreatePlease to create content