When calling another company we get to their auto attendant and enter the extension we wish to call. The IP phones do not show what we entered. They stop recording digits once the call is connected. Is there a setting that will change that behavior? The call is connected, we just don't see the digits.
Just to add a note to Jorge's.Most newer systems all have this funtionality as a User Security feature.When users connect to Voicemail or IVR systems that require a password or PIN,they do not want the additional digits displayed for others to see.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...