We are using IPCC Express and I have been told there is not a Vista compatible version of the Agent & Supervisor Desktop Software for this deployment. If this is so, when will a Vista compatible version be released? While Ver. 7.2 is Vista Compatible, it is my understanding that ver 7.2 is for IPCC Enterprise Servers Only. We are running Vista on our workstations but must also maintain a separate PC running Windows XP just for the Cisco Agent & Supervisor Desktop Software. Any info would be appreciated.
So far I have received no feedback from Cisco nor from anyone else through this forum on this issue. I have been told by someone in our VOIP Telecommunications dept. that our Cisco Rep. is working on a solution for us. It sounds like we need to upgrade some of our server software to a newer version that will include a Vista compatible client. Sorry, but I do not have all of the particulars on which software needs to be upgraded nor do I know what version it should be upgraded to. Once I receive "official word" on what needs to be done, I'll post the info here.
I believe you are referring to the fact that the Cisco Agent software does not install properly on an XP PC with IE7 already installed. We experienced that problem as well and ultimately had to uninstall IE7, install the Agent software, then reinstall IE7 (this was about a year and a half ago). I have not researched the percise reason for the conflict but it seems to be easily resolved by removing IE 7 and resinstalling it afterwards. We have not yet installed SP3 on our XP clients but it is definitely encouraging news to hear the apparent conflict is resolved once SP3 is installed.
We are currently in the process of upgrading our IPCC server software and soon the Agent software (which is Vista compatible) will be installed on the client PCs. Since I am not involved in the adinistration on the IPCC system and servers, I do not yet know the details. As I said in a previous post, as soon as I have all of the details of the upgrade configuration, I will post the information here. Once the migration is complete, I will pass along the specifics of our upgrade and the benefits it has afforded us, in addition to a Vista compatible Agent software.
I have been doing more checking on the Vista question. It appears Vista is supported on UCC Express on 5.0.2 and 6.0.1. In addition to the site below, the Release Notes for 5.0.2 state it supports Vista along with the latest installation guide for CAD 6.4.2:
CAD 6.4(2) includes the following new features:
â Support for Microsoft Vista Business and Ultimate Editions
Now the biggest question: Does anyone know how to get it? I am openning a TAC case since I cannot find it on the software download site and installing 5.0(2) did not update the CAD/CSD installer files.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...