Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AIM module not in slot 0 like the E1 module

Do you know if it exists a command when an AIM card is on the slot 2 of a 2691 XM and the E1 module is on slot 0.

Does it exist a command to tell the E1 card on slot 0 to use the DSP in slot 2.

Irene

4 REPLIES
New Member

Re: AIM module not in slot 0 like the E1 module

Can somebody give me is feed back.

Do I need to indicate to the E1 interface card in slot 0 how to join the AIM-30 in slot 2?

Silver

Re: AIM module not in slot 0 like the E1 module

It doesn't matter what slot the AIM module is in, the DSP resources will be assigned to the E1 VWIC timeslots.

Make sure you add the commands -

network-clock-participate aim

network-clock-participate wic

network-clock-select 1 e1

This will ensure the AIM and the VWIC are using a common clock reference.

New Member

Re: AIM module not in slot 0 like the E1 module

thanks

I will give you a feed back as soon as possible

New Member

Re: AIM module not in slot 0 like the E1 module

Match exactly my need

Thanks

Irene

249
Views
0
Helpful
4
Replies
CreatePlease login to create content