It looks Cisco only supports the following router to work with AMIS: WS-X6624 blade, WS-X6608 Blade, 2600,3600 router and VG200.
We have a scenario like this: Unity is only integrating with CCM. The gateway is AS5350. One PIR hook up to PSTN and the other PRI on the AS5350 is connecting to Nortek PBX on which it is running meridian voice mail. We want to set up AMIS between Meridian and Unity. Is AS5350 supported ?
It's kinda a gray area. Those gateways which you listed are the only gateways that we have tested with and know work for sure. I am 95% sure that the AS5350 will also work as well but we can't guarantee it without testing. If you have problems with it we will do our best to support you because that is the Cisco way.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...