Has anyone successfully integrated Unity and Audix without the use of the Interchange? Our SE said he was able to get it working and will send us information on how he did it. But while waiting, maybe you can let me know too that it works in your environment...Thanks...
FYI: We can successfully receive messages from Audix but we can't send back. The error we're getting from the traces is "AMIS WRONG NUMBER MESSAGE". We have confirmed several times that we are calling the correct number (the same number that other Audix systems call to connect to that Audix system we're using) and tried multiple mailbox extensions...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...